November 12, 2024

The working principle of a laser engraving machine is based on the irradiation of a laser beam, which causes the material to melt and vapor instantly, thus achieving the engraving effect. The laser beam is transmitted and focused on the surface of the material through an optical mechanism. The material at the point high energy […]

1. Turn on the main power switch of the machine tool. Turn on the control power of machine tool (key switch). Wait for the system self-check to complete, and return each axis of the machine tool to the reference point. 2. Start theiller, check the water temperature and water pressure (normal water pressure is 5bar).

Bitmap engraving is similar to high-definition dot matrix printing. The laser head swings from side to side, each timeaving a line composed of a series of dots, then the laser head moves up and down at the same time to engrave multiple lines, finally forming the entire or text. Scanned graphics, text, and vectorized graphics

1. When using auto focus, make sure the auto focus rod is securely tightened, otherwise the worktable will push against the laser. 2. Do not open the machine cover while the laser engraver is working. 3. Turn on the smoke exhaust and blowing equipment during processing. 4. When processing or paper, pay attention to the

1. The laser tube installation support points should be reasonable, with the support point at 14 of the total length of the laser tube. Otherwise, it will cause the laser tube’s spot mode to deteriorate, and after some time, the spot may into several points, leading to a decrease in laser power that fails to

The fiber laser engraving machine and the CO2 laser engraving machine have significant differences in various. Below is a detailed comparison of the two: 1. Technical Principle Fiber Laser Engraving Machine: Uses a fiber laser, with lower laser power a working wavelength of 1.06 microns. The laser beam quality is good, with fine processing and

Laser engraving machines and laser marking machines have significant differences in various aspects. Below is a detailed of the two: 1. Working Principle and Purpose Laser Engraving Machine: Working Principle: It uses a laser beam to engrave on the surface the material. By controlling the position and intensity of the laser beam, it focuses the

Laser engraving machines and CNC engraving machines have significant differences in various aspects. Below is a detailed of the two: 1. Working Principle Laser Engraving Machine: It uses laser melting or burning method for engraving. The laser source emits a, and the CNC system controls the stepper motor to move the laser head, mirror, lens,